Sale!

Pestrol Solar Mosquito Catcher – Larvae Killer

Original price was: £98.51.Current price is: £59.95.

Solar-powered mosquito control designed to target the breeding cycle

  • Attracts egg-laying female mosquitoes to a controlled water reservoir
  • Larvasonic acoustic technology targets developing mosquito larvae
  • Helps interrupt the mosquito lifecycle before larvae become adults
  • Solar powered with no mains electricity or wiring required
  • Uses water, shade, contrasting surfaces and blue/UV LED attraction
  • Chemical-free operating mechanism
  • Silent operation for gardens and outdoor living areas
  • Coverage up to approximately 300m²
  • Low-maintenance outdoor design
  • Best used alongside removal of other unnecessary standing water

Description

Pestrol Solar Mosquito Catcher – Larvae Killer

Break the Mosquito Breeding Cycle Before Larvae Become Biting Adults

The Pestrol Solar Mosquito Catcher – Larvae Killer takes a different approach to mosquito control.

Instead of relying only on attracting and killing adult mosquitoes after they are already flying and biting, this solar-powered system is designed to attract egg-laying female mosquitoes and interrupt the mosquito lifecycle at the larval stage.

The unit creates an attractive artificial breeding environment using water, shaded areas, contrasting black-and-white surfaces and blue/UV LED light. Female mosquitoes searching for somewhere to lay their eggs are encouraged towards the water reservoir.

Once mosquito larvae develop in the water, the unit’s Larvasonic acoustic technology transmits specialised acoustic energy through the water, targeting the larvae before they can mature into adult mosquitoes.

Powered entirely by solar energy, the unit requires no mains connection, chemical insecticides or replacement bait cartridges, making it a practical option for ongoing mosquito management around gardens and outdoor living spaces.

Key Features

  • Targets the mosquito breeding cycle – designed to attract egg-laying females and eliminate developing larvae.
  • Larvasonic technology – uses specialised acoustic energy within the water reservoir.
  • Solar powered – no mains electricity or outdoor wiring required.
  • Chemical-free operation – does not rely on insecticide sprays or chemical larvicides.
  • Multiple attraction methods – combines water, shade, contrasting surfaces and blue/UV LED light.
  • Up to 300m² coverage – designed for outdoor mosquito management around homes and gardens.
  • Silent operation – acoustic technology operates without disruptive audible noise.
  • Low ongoing maintenance – primarily requires water checks and periodic cleaning.
  • Weather-resistant outdoor design – suitable for gardens, patios and other outdoor areas.

How Does the Pestrol Solar Mosquito Catcher Work?

The system works by taking advantage of the natural breeding behaviour of mosquitoes.

Rather than trying to chase mosquitoes away, it creates an appealing location for gravid female mosquitoes – females that have already taken a blood meal and are looking for water in which to lay their eggs.

The process can be understood in four stages.

1. It Creates an Attractive Breeding Site

  • Female mosquitoes naturally search for suitable standing water when they are ready to lay eggs.
  • The Pestrol Solar Mosquito Catcher contains a water reservoir that provides the type of environment mosquitoes naturally investigate as a possible breeding site.
  • The unit is deliberately designed to encourage mosquitoes to choose this controlled location rather than other small sources of standing water around the property.

2. Visual Cues Help Draw Mosquitoes Towards the Unit

Mosquitoes don’t rely on one signal alone when identifying a suitable breeding site.

The Solar Mosquito Catcher combines several attraction features:

  • Water
  • Shaded areas
  • Black-and-white contrasting surfaces
  • Blue/UV LED illumination

These elements help create a visually attractive environment for mosquitoes searching for a place to lay eggs.

The blue/UV LED operates using the energy collected by the solar panel, so no external electrical connection is required.

3. Mosquitoes Lay Eggs in the Water

  • Once attracted to the unit, gravid female mosquitoes may lay their eggs in or around the water reservoir.
  • The eggs then hatch and enter the larval stage of the mosquito lifecycle.
  • At this stage, mosquito larvae live in water and must develop through several stages before eventually becoming pupae and emerging as flying adults.
  • This is the key point at which the Pestrol Solar Mosquito Catcher intervenes.

4. Larvasonic Technology Targets the Larvae

  • The unit uses specialised Larvasonic acoustic technology.
  • A transducer transmits acoustic energy through the water reservoir. This energy affects the internal gas structures within mosquito larvae, disrupting their ability to survive and develop normally.
  • The objective is to eliminate the larvae before they can complete their development and emerge as adult mosquitoes.
  • By repeatedly attracting egg-laying mosquitoes and targeting their offspring, the system is designed to place ongoing pressure on the mosquito breeding cycle around the treated area.

Why Target Mosquito Larvae?

A single adult female mosquito can lay numerous eggs during her lifetime.

Traditional adult mosquito traps generally act after mosquitoes have already emerged, dispersed and begun biting.

Targeting larvae provides another point of intervention.

The mosquito lifecycle follows four main stages:

Egg → Larva → Pupa → Adult mosquito

The Pestrol Solar Mosquito Catcher focuses primarily on the egg-laying and larval stages.

Interrupting development before mosquitoes reach adulthood can help reduce the number of new mosquitoes continually emerging around the property.

How Is This Different From a Mosquito Zapper?

Traditional insect zappers generally use light to attract flying insects towards an electrically charged grid.

That approach targets insects that are already adults.

The Pestrol Solar Mosquito Catcher works differently.

It is designed to:

  • Attract female mosquitoes looking for somewhere to lay eggs
  • Encourage breeding activity into a controlled water reservoir
  • Target mosquito larvae developing inside that reservoir
  • Reduce the opportunity for those larvae to become adult mosquitoes

There is no exposed electrical killing grid and no loud zap when insects are caught.

It is therefore better considered a mosquito breeding-cycle management system rather than a conventional insect zapper.

What Is Larvasonic Technology?

Larvasonic technology uses acoustic energy transmitted through water.

The system includes a specialised transducer that introduces acoustic vibrations into the water reservoir.

Mosquito larvae contain internal gas structures that are affected by this acoustic energy. The resulting disruption damages the larvae and prevents them from successfully progressing through the mosquito lifecycle.

Because the process occurs within the water reservoir, the device can operate quietly without producing the loud noise associated with traditional electric insect zappers.

What Mosquitoes Does It Target?

The system is designed to attract gravid female mosquitoes – females looking for suitable water in which to lay eggs.

It then targets the resulting mosquito larvae developing in the reservoir.

Rather than attempting to repel mosquitoes away from the property, the system deliberately creates an attractive breeding location where larval development can be interrupted.

Where Should I Position It?

Placement is important.

For best results, install the Solar Mosquito Catcher somewhere that provides good solar charging while remaining close to areas where mosquitoes naturally breed or gather.

Suitable locations can include:

  • Garden edges
  • Patio areas
  • Near vegetation
  • Near damp or shaded garden areas
  • Around outdoor entertaining spaces
  • Close to areas where mosquitoes are regularly noticed
  • Near – but not inside – natural or artificial water features

Avoid placing the unit somewhere completely enclosed or heavily shaded throughout the entire day.

Sunlight Requirements

The system relies on solar energy, so the solar panel needs adequate sunlight to charge the unit.

Aim for approximately 6–8 hours of useful sunlight per day where practical.

When selecting a location, try to balance two requirements:

  • Enough sunlight to charge the solar system
  • Proximity to areas attractive to mosquitoes

If the unit receives insufficient solar energy, its powered functions may not operate as effectively.

How to Set Up the Solar Mosquito Catcher

Setup is straightforward:

  1. Choose an appropriate outdoor location.
  2. Make sure the solar panel can receive adequate sunlight.
  3. Position the unit near an area where mosquito activity has been observed.
  4. Fill the water reservoir to the indicated level.
  5. Ensure the unit is sitting securely and level.
  6. Allow the solar panel to charge during daylight.
  7. Periodically check that sufficient water remains in the reservoir.

Always follow the supplied instructions when initially setting up the unit.

Water Is an Important Part of the System

Unlike many mosquito-control products, water is intentionally placed inside this unit.

Normally, eliminating standing water is one of the most important methods of reducing mosquito breeding around a property.

The difference here is that the water is being used as part of a controlled mosquito-management system.

Mosquitoes are encouraged towards this particular water source, while Larvasonic technology targets larvae that develop inside it.

You should still remove unnecessary standing water elsewhere around the property, such as water collected in:

  • Buckets
  • Plant saucers
  • Old containers
  • Blocked gutters
  • Children’s toys
  • Tarpaulins
  • Disused pots
  • Other containers that can hold rainwater

Reducing competing breeding sites can also make the controlled breeding environment more relevant to mosquitoes in the area.

When Will I Notice Results?

Mosquito population reduction is not necessarily immediate.

Because this system works partly by interrupting the breeding lifecycle, it takes time for fewer new adult mosquitoes to emerge.

The supplied product information indicates that reductions may become noticeable within approximately 2–4 weeks.

Actual results can vary depending on:

  • Existing mosquito population
  • Weather
  • Temperature
  • Rainfall
  • Nearby breeding sites
  • Placement of the unit
  • Amount of sunlight available
  • Number of mosquitoes entering the treatment area
  • Standing water on neighbouring properties

For best results, think of the device as part of an ongoing mosquito-management programme rather than an instant mosquito killer.

Coverage Area

The Pestrol Solar Mosquito Catcher is designed to provide mosquito-management coverage of up to approximately 300m².

Coverage in real-world conditions will depend on factors such as vegetation, property layout, surrounding breeding sites and mosquito pressure.

Larger properties or locations with significant mosquito activity may benefit from more than one unit positioned in separate problem areas.

Maintenance

The system is designed to require relatively little routine maintenance.

Recommended maintenance includes:

  • Check the water level approximately monthly.
  • Refill the reservoir when required.
  • Keep the solar panel clean and unobstructed.
  • Remove dirt, leaves or debris from the unit.
  • Clean the reservoir and external surfaces approximately every 4–6 weeks as required.
  • Check that vegetation has not grown over the solar panel.
  • Periodically inspect the unit for damage.

Local temperature and weather conditions may mean that water needs to be checked more frequently during hot or dry periods.

Chemical-Free Mosquito Management

The Pestrol Solar Mosquito Catcher does not require conventional insecticide sprays or chemical larvicides for its operating mechanism.

This makes it useful for customers looking to reduce reliance on repeatedly spraying outdoor areas.

However, effective mosquito management generally works best when several approaches are used together, including:

  • Removing unnecessary standing water
  • Keeping gutters clear
  • Emptying containers after rain
  • Maintaining pools and water features appropriately
  • Using screens where practical
  • Managing dense vegetation around outdoor living areas

The Solar Mosquito Catcher can then provide an additional method of targeting the mosquito breeding cycle.

Product Specifications

Specification Details
Product Pestrol Solar Mosquito Catcher – Larvae Killer
Dimensions 29cm × 29cm × 18cm
Coverage Up to approximately 300m²
Power source Solar
Primary technology Larvasonic acoustic energy
Attraction system Water, blue/UV LED, contrasting surfaces and shaded breeding environment
Primary target Gravid female mosquitoes and developing larvae
Noise Silent operation
Electrical connection Not required
Chemical insecticide required No
Installation Outdoor
Recommended sunlight Approximately 6–8 hours daily
Maintenance Water checks and periodic cleaning
Construction Weather-resistant outdoor design

A Different Approach to Mosquito Control

The Pestrol Solar Mosquito Catcher – Larvae Killer doesn’t simply wait for adult mosquitoes to fly into an electric grid.

It uses their natural breeding behaviour against them.

By creating an attractive water-based breeding site and then using Larvasonic acoustic technology to target developing mosquito larvae, it aims to interrupt the mosquito lifecycle before another generation of biting adults can emerge.

With solar-powered operation, no mains wiring and no conventional insecticide required, it provides a practical long-term addition to mosquito management around gardens and outdoor living areas.

For best results, combine the Solar Mosquito Catcher with the removal of other unnecessary standing-water sources around your property.

Reviews

There are no reviews yet.

Be the first to review “Pestrol Solar Mosquito Catcher – Larvae Killer”

Your email address will not be published. Required fields are marked *